IPS monitors for photo editing
Three IPS Panel Monitors: a Viewsonic, an HP DreamColor, and an Eizo with hood and colorimeter.

Best Monitors for Photo Editing : Is it REALLY that important?

Is the monitor really that important?

The quick answer: YES, absolutely.

IF YOU CAN’T SEE THE COLOR AND TONAL DIFFERENCES on your monitor, then you can’t make good post-processing decisions and adjustments to your digital negatives. It’s that simple. You can’t adjust your curves to give your print smooth tonal transitions or to distinguish subtle shadow detail if you can’t see those transitions and details to begin with.  In order to make optimal adjustments to your digital negatives, you must be able to see as much of your color gamut as possible and the color must be accurate and reliable.

Monitor Technology : IPS vs. TN

TN Monitor
Matthew Gore | Light And Matter

TN stands for Twisted Nematic, which is by far the most popular and wide-spread screen technology. If you have a standard or even higher-end “gaming” LCD monitor for your PC, this is what you have (the same is not true for some Macs). TN screens initially gained popularity because of their low energy consumption, but also because of their quick response time, which is important in reducing ghosting and producing smooth motion for gaming and video. Most TN monitors these days advertise response times of 2-6ms , though they are not always measured in the same way, so comparison is difficult. They are also very bright and are being made with increasingly high resolution, so they appeal to most average consumers. They’re also the cheapest monitors on the market.

More importantly for photographers, though, is that TN monitors use 6-bit color technology, and therefore can’t display the full 24-bit color range (16.7 million colors) that video cards can produce (and that the monitor manufacturers usually claim they can produce). Instead, they attempt to simulate the full range of colors by interpolation of other colors, which they do with limited success. Many TN monitors (non-LED) display less than 30% of the NTSC color gamut, and the color that they do display is only accurate when viewed head-on, so the appearance of color shifts when viewed from and angle is dramatic, and problematic around the edges in any circumstances. Improvements are continually being made in TN technology, but they have a long way to go.

Matthew Gore | Light And Matter

IPS panel monitors, on the other hand, have a different set of advantages and disadvantages. IPS stands for In-Plane Switching, although modern IPS panels actually make use of a variety of improved technologies, such as S-IPS,  H-IPS,  AS-IPS, and E-IPS. Engineering details aside, the main advantages to IPS panels is that they are truly 8-bit technology (or 10-bit), with many IPS monitors producing 125% or more of the number of colors in the NTSC gamut. Second, the colors do not shift when viewed from different angles; most remain accurate well past 170 degrees. But of course, there are disadvantages as well, though they are also improving. Initially, the IPS technology was much slower than TN, with response rates of 20-50ms. This made it unusable for video and gaming. S-IPS and a variety of “turbo” technologies have now improved that rate, and 14ms and faster speeds are common, making them very suitable for video, though still somewhat less desirable for gaming.

IPS monitors have been much more expensive as well, though the gap is beginning to narrow.  Even a year ago, the most common IPS monitors (Mac Cinema Displays) cost three times as much as similarly sized TN screens, but now 23″ IPS monitors can be found for as little as $300. Professional graphic arts monitors using IPS and other less common technologies still cost thousands of dollars, though.

S-PVA is another excellent but less common technology. Like IPS, S-PVA panels use at least 8-bit technology, have very good gamut coverage, and colors do not shift when viewed off angle.

Standard Gamut vs. Extended Gamut

colorspace gamut comparisons
Matthew Gore | Light And Matter Image Courtesy of Wikipedia.

Photo editing monitors can be broken down into two main categories: Standard Gamut (sRGB) and Wide or Extended Gamut. Standard gamut monitors generally attempt to display all of the colors in the sRGB color space, while extended or wide gamut monitors attempt display a larger gamut, such as that found in the AdobeRGB color space.

Most people immediately assume that “more colors = better” and decide that they need an extended gamut display. However, the matter is slightly more complicated than that.

Although extended gamut displays work wonderfully for their specific purpose with programs that support them, they are generally not great for general purpose use. Keep in mind that photos on the internet are virtually all sRGB, and more importantly, our browsers display them as sRGB. When a program’s sRGB output is displayed on a wider gamut monitor, though, the colors can go wild! They frequently shift and become over-saturated, others may look washed out. To deal with this, most wide gamut monitors have separate profiles for different uses, and you need to switch between them depending on what you’re doing, or, if properly set up, a color managed operating system can sometimes switch for you. (Color management is too complex and beyond the scope of an article like this, but a quick Google search will help)

And if you only publish to the web or publish through online printers who only accept sRGB jpgs (as many wedding and portrait photographers do), then there is little advantage to using a wide gamut monitor anyway, since your output is ultimately going to be sRGB.

However, if you do fine art printing at a high quality lab that can accept your files in a wide gamut format (Adobe1998 or ProPhotoRGB) or if you print on a professional quality inkjet printer in your own digital darkroom, it’s worth the effort to use an extended gamut monitor. If you have a workstation that is dedicated to photo editing (or a similar project with the need for wide gamut display), making the decision to get a wide gamut monitor should be even easier.

Which Monitor Should I Get?

The answer, of course, depends on your budget. You can spend anywhere from $300 to $3000 or more.  In this case, however, it is a safe bet that even the cheapest options will be dramatically better than what you’re currently using (if you’re using a standard TN desktop workstation screen).

Entry-Level IPS Monitors

Viewsonic IPS Monitor
Matthew Gore | Light And Matter Though I wouldn’t call it “frameless”, exactly, the Viewsonic IPS screens are high quality and attractive.

On the low end of the price spectrum, Viewsonic has been reliably produced IPS monitors for a few years now. In October 2012, Viewsonic announced 3 new slick-looking IPS panel monitors: the VX2370Smh-LED 23″ and VX2770Smh-LED 27″ models for $ and $, which are available now, and a 22″ model that should be in stores before 2013.  These new monitors have very nice, consistent color, and also have a “frameless” design that makes them a little easier to use in a multi-monitor setup. $164 is a great price for the 23″ monitor; only two years ago, their 23″ model was over $300. All three have HDMI inputs.

Asus is also now producing a couple of affordable lines of IPS monitors. The VS series includes the ASUS VS239H-P a nice looking 23″ full HD panel with a price tag of $179.10, and a smaller 22″ model (the VS229H-P) costs only $. The PB series is a bit more expensive, but offers 100% coverage of the sRGB gamut. The 23″ PB238Q currently costs $ and also features display-port, HDMI, and DVI connectors, and a USB hub (sRGB coverage of the VS model is not provided by Asus).

Long known for making excellent high-end graphics displays, DELL has also ventured into the entry-level market recently. The Ultrasharp U2312 and U2412 (23 and 24″) are good quality e-IPS displays, costing $ and . The U2312 covers approximately 95.8% of the sRGB gamut, which is good, but clearly not quite as good as the ASUS PB series.

Mid-Range IPS Monitors

If you can afford to spend a bit more money, the options open up tremendously, and the potential for enhanced performance also increases.

The new DELL U2410 is an an impressive monitor for the price. At only $540, it provides 100% sRGB coverage and 96% of AdobeRGB, with 12-bit internal processing… not to mention built in card readers, USB ports, etc.  Early production models of this monitor had some dithering problems that have since been corrected with updated firmware, so they should not be a problem. Because this is a true extended-gamut monitor, operating systems prior to Windows 7 (that don’t manage your color) will make this monitor difficult to use. (Some users of this monitor complain of a pink-green shift across the screen. It’s unclear whether this is true with the newer updates of this model, as many people also claim that there is no banding or color shift. This may be a case in which you’ll have to order and replace with another unit if you have problems).

Matthew Gore | Light And Matter A popular option. Slightly less expensive when NOT purchased directly from Apple.

Another very popular option is the Apple 24″ Cinema Display. Apple Cinema Displays have been  standard workhorses of the graphic art trade for years, and they’re one of the reasons that Macs have kept such a strong hold on the industry. They’re more expensive than some similarly performing models (around $880 for a 24″), but have a reputation for quality. Some people have reported problems with reflections on the glossy screen surface.

Professional Editing IPS Monitors

If high performance is more important to you than sticking to a tight budget, there are a few monitors that fit the bill.

The HP DreamColor LP2480zx is probably the nicest monitor that I’ve ever had the opportunity to use. It is a 10-bit monitor, covering a full 100% of the AdobeRGB color space. The difference between this monitor and the Apple Cinema Display that I’m more familiar with is clear from the first moment that I used it; I could actually see more in photos than I had previously realized was there. This does come at a price, though… about $1850.

Similarly, the Eizo ColorEdge CG241W (and related monitors such as the CG243W, etc.) is a stellar performer. If you’d like to read a full comparison between an older Eizo monitor and an Apple Cinema Display, let me direct your attention to the Luminous Landscape article that first drew my attention to Eizo monitors, here: The Eizo ColorEdge CG301W vs. The Apple 30″ Cinemadisplay. Again, the performance comes at a cost… especially if you opt for the 30 inch versions of these monitors, but even at 24″, the cost is substantial at $1900.

There are, of course, numerous other excellent monitors out there. In fact, I haven’t even mentioned the offerings from major companies like Samsung (though I left them out on purpose) and LaCie. I’ve listed some additional monitors in the table below, but I hope that everyone reading this will add their experience and input as well. I hope that this helps!

[Since there are more monitors than I can reasonably test myself, I’ve listed monitors with which I’ve had personal experience, for which I’ve heard good recommendations from reliable sources, or about which I’ve read multiple convincingly good reviews. If your favorite monitor has been left out, feel free to email me or reply to this thread with relevant info. -JMG]

Brand ModelPriceScreen Size / Aspect RatioResolutionPixel Pitch
(Smaller is Better)
Panel TypeResponse Time / Contrast RatiosRGB or Extended GamutLUT Bit Depth% of sRGB Gamut Coverage% of Adobe1998 RGB Gamut Coverage
Apple27" Thunderbolt Display[aprice asin='B004YLCKYA']
27"2560 x 1440.233mmIPS12 ms
1000:1
sRGB8-bit per color76% (tested)
DellUltrasharp U2410[aprice asin='B00302DNZ4']
24"
16:10
1920 x 1200 .27mmIPS6 ms
1000:1
Extended100%96%
DellUltrasharp U2711[amazon template=price&asin=B0039648BO]27"
16:9
2560 x 1440.233mmIPS6 ms
1000:1
Extended100%96%
DellUltrasharp U3011[aprice asin='B004KKGF1O']
EizoFlexScan SX2462W[aprice asin='B004WIW8X8']24"1920x1200.270mmIPS with overdrive5ms grey-to-grey
850:1
Extended12-bit per color100%98%
EIZOColorEdge CG241W[aprice asin='B000T9OX78']24"
16:10
1920 x 1200 .27mmVA with overdrive6ms
850:1
Extended12-bit per color98%95%
EIZOColorEdge CG245W$280224"
16:10
1920 x 1200 .27mmIPS with overdrive5ms
850:1
Extended12-bit per color100%98%
EIZOColorEdge CG243W[aprice asin='B002RGTFLA']24"
16:10
1920 x 1200 .27mmIPS with overdrive5ms
850:1
Extended12-bit per color100%98%
HPDreamColor LP2480zx[aprice asin='B001B0QMGE']
24"
16:10
1920x1200.270mmIPS6 ms grey-to-grey
1000:1
Extended12-bit per color100%100%
HPLP2475w[aprice asin='B001FS1LLI']24"
16:10
1920 x 1200 .27mmIPS5ms
1000:1
sRGB8-bitnot providednot provided
HPZR22w[aprice asin='B003D1CFHY']21.5"
16:9
1920 x 1080.2475mmS-IPS8ms
1000:1
sRGB8-bitnot providednot provided
HPZR24w[aprice asin='B003D1ADUU']24"
16:10
1920 x 1200 .27mmS-IPS7ms
1000:1
sRGB8-bit97%not provided
HPZR30w[aprice asin='B003RBNMJA']30"
16:10
2560 x 1600.251S-IPS7ms
1000:1
Extended10-bit100+%111% (tested)
LaCie324i$113924"
16:10
1920 x 1200 .27mmP-IPS6 ms
1000:1
Extended10-bitnot provided98%
NECLCD3090WQXi-BK[aprice asin='B0013DJ31A']30"2560 x 1600.251IPS6ms grey to grey
1000:1
Extended12-bit100%98%
NECP221W[aprice asin='B001IWOB86']22"1680 x 1050.2828ms grey to grey
1000:1
Extended10-bitnot provided96%
NECLCD2490WUXi2-BK[aprice asin='B002C9KAO8']24"
16:10
1920 x 1200 .27mmIPS8ms grey to grey
1000:1
sRGB12-bit97%75%
NECPA271W[aprice asin='B003LD1QRY']
27"
16:9
2560 x 1440.233mmIPS7ms grey to greyExtended14-bit100%97.1%
NECPA241W[aprice asin='B0036V76NY']
24"1920 x 1200 .27mmIPS8ms grey to grey
1000:1
Extended14-bit100%98%
NECPA231w[aprice asin='B0047T7NQ4']23"1920 x 1080.265IPS8ms grey to grey
1000:1
Extended14-bit--
ViewsonicVP2365wb[aprice asin='B002R0JJYO']23"1920x1080.265IPS14 ms
1000:1
sRGB8-bit--

Additional Necessities

If you’re going to spend the money to get a good quality display, you’ll also need a color calibration system for it. In fact, this is true no matter what monitor you’re using… but it would be especially wasteful not to calibrate a high quality display. These can be quite inexpensive, and there are a variety of choices. Most high-end monitors are bundled with a colorimeter already. The Spyder models range in price from about $85 to a couple hundred, as do the models from X-rite, like the ColorMunki ($500) and Eye-One LT ($150).

It also makes sense to create color profiles for your camera using something like an X-Rite Color checker. It can dramatically improve the color accuracy of your photos, and is quite simple (see the videos here).

Additionally, you should keep in mind that some of these monitors use 10-bit or higher technology, and require specific graphics cards, and in some cases, the DisplayPort connector must be used rather than the standard digital output or HDMI. If you expect to use 10-bit or higher display technology, check with the monitor manufacturer to see what graphics cards are supported.

[If you’d like further information about building a computer specifically for Photo Editing, please see my article on Choosing the Best Computer for Photo Editing – JMG]

Editor-in-Chief
Subscribe
Notify of
guest

91 Comments
Inline Feedbacks
View all comments
Mike

These days some IPS panels are 6-bits with Advanced Frame Rate Control technology. I think you should correct that in your article Mathew.

LeeC

” the main advantages to IPS panels is that they are truly 8-bit technology (or 10-bit)”

Considering that line is simply wrong, I find it hard to trust the rest of the article. I suggest some more research and then some correct information be added. 6-bit + FRC is very common, and that… is most definitely not *truly 8-bit technology*

John levey

Hi Mathew.
I have an Asus PB238Q monitor. Can I calibrate it with a Spider 4 Express.
I am new to all this.
Many thanks

David George

Any chance you will be updating this anytime soon?

I still love my HP LP2475 (discontinued). I want to replace my Dell 2007FP. Have toyed with getting a refurbished 2475W on eBay (about $240). I am unimpressed with the reviews of the newer HPs. The NEC is out of my range.

David George

I hear you! I look forward to any updates. I’m on the fence as to what to do and seem to change my mind every week :),

Francisco

Very nice article. Iam now looking at buying on of the following, but a bit confused by your statemenst:
“…offers 100% coverage of the sRGB gamut. The 23″ PB238Q…”
“… The U2312 covers approximately 95.8% of the sRGB gamut, which is good, but clearly not quite as good as the ASUS PB series….”

Looking at Dell´s homepage, the U2312 covers 82% of NTSC and that is much more than sRGB (72% of NTSC)
Is this correct?
Also, will any of these two be much better than the entry level Viewsonic or Asus VS series you mentioned?

Thanks,
Francisco

Jerry

I see that the Eizo ColorEdge CG301W is no longer available! Do you have a recommendation for a equivalent monitor from Eizo?

hlinton

Do you have any thoughts/comments regarding the HP ZR2740w, 27″ LED monitor? I was in the process of getting the NEC monitor that you like but ran into a wall with the supplier and the price went from 700 CHF to over 1000 CHF in the past month! If all else fails I can get a decent deal on the Apple ThunderBolt display. Is there a difference between that and the Cinema Display with regard to photos? Thanks.

Joseph

What do you think of ”led tv” vs ”led Monitor” for video editing .. such as Samsung UE22F5400 LED 22″ Full HD Smart TV vs Asus VS239HR..?

Jess Thomas

Hello,

I wondered what your thoughts were on the Dell U2711? The Dell I can get in Australia for about $700.00. I have about $1000.00 that I would like to spend on a monitor. I have read so many reviews and I understand that the Eizo and NEC are the best monitors on the market for photographers.

Cheers :-)

Richard Porst

Hi Matthew, why did you intentionally leave out Samsung products?

Richard Porst

Hi Matthew, thanks for the heads up on this. I’m new to all this tech stuff. Give me a darkroom and I’m comfortable.

David George

Thanks for the informative review.

One point that you do not cover is IPS versus S-IPS.

I currently use an HP LP2475w (no longer available), which I really love, as my primary screen. I use a Dell 2007FP as my 2nd screen.

I’d like to get an additional 24″ and move the LP2475 to the 2nd screen spot. (I need a larger 2nd screen.)

The HP LP2475w is an IPS screen as is the Dell U2410 (another I’ve considered)

My understanding is that the HP ZR24w (reviewed above)has been replaced by the HP ZR2440w. I believe both of these are S-IPS. Isn’t that lesser technology than IPS?

I’m also wary based on the price; the HP ZR2440w is under $400; I paid over $500 for the LP2475w.

My primary concern is image quality for mostly photo but also some video editing. I use an Xrite calibration device as needed.

I’m wondering whether I should go with the Dell to get true IPS at a decent price point or bite the bullet and get the NEC MultiSync PA241W-BK 24, which is $750 @ B&H right now.

I tend to keep technology for a long time and my system is in use 18 hours a day since I work at home.

My overwhelming concern is quality.

Any advice would be most appreciated.,

Thanks.

dg

 

David George

Thanks for the reply, Matthew. Keeping track of the different IPS designations is difficult.

I’m still leery about the HP ZR2440w; the PA241W-BK 24 is definitely my top choice.

And thanks for clarifying the gamut of the LP2475; some reviews refer to that as “wide gamut.” I have been very satisfied with it overall.

I may hang fire and see what HP comes out with next: I still don’t think they have really matched the LP2475 in terms of quality.

dg

David George

Thanks for clarifying.

I was considering some of comparable Dells, e.g., the U2410 or U2412, but with the 2412 in particular I think they’re scrimping on quality to get a lower price point. I use a Dell 2007FP as my 2nd screen and one of the things I have always preferred about the HP LP2475 is that it is a lot brighter.

dg

Tuli

Are there problems using NEC PA241W for video because of the 8milisec response time (“ghosting…)?
and the lack of HDMI connection?

Is Spectraview enough for calibrating the monitor or something else is needed?

Thanks

Tuli

In order to determine which one is better? I read quite a few reviews of NEC-PA241WDell-U2711: PCmag of NEC & Dell, Squido of NEC) (none for NEC), Cnet, writeups by Amazon & Newegg… Essentially, they are both excellent but for this money I might as well buy the better one.

I am confused from all the details and don’t know how important are some of them. PCmag lists a very long list of possible adjustments for NEC (OSD / keyboard & mouse) which are not listed for Dell. How important are they? I don’t know whether Dell doesn’t have them?

The main differences that I see, beside size, pivot and the above list are: Warranty NEC 4 yrs vs 3 Dell (I think 4 for backlighting), Price NEC 680-700, Dell ~760+ & 140 stand. NEC better job of reproducing all shades of the grayscale (important if you work with highly detailed images and require extreme grayscale performance) – How important?. Dell has more ports. NEC no HDMI. Dell 6ms response time (better for multi media…) NEC 8 (movement: ghosting). AdobeRGB coverage: Dell 96% NEC 98% (doesn’t look significant difference to me?)

[Note: PCmag writes: “sRGB ( covers 72% of NTSC gamut)”….and
“wide gamut technology (110% of the NTSC color gamut)” ?

Thanks a lot!

Tuli

Hi Matthew,

Thank you so much for your prompt response, resulting in me being able to think clearer today; I just stuffed too much info into my head and it got mixed up…Today, I did hours of  “home-work”

1. Stand: after you suggested I googled, was overwhelmed by the too large # of options to digest (that’s google…). The only one that I marked was Ergotron that you later recommended. So I checked the MX, there is also LX (maybe too long) – $169 is pretty expensive. There are 5 types of Neo-Flex. MX states: for “mid-size” displays. Neither one seems to have a base – I can’t screw it to my work area ? I tried but didn’t reach them; I’ll try tomorrow. I tried to contact Dell – to find out whther they sell one, and B&H – their “expert” is useless – he doesn’t understand or know some basics.

2. Yes, I prefer a 27″ monitor; however, at this point, since I’m not going to get everything I want in one package, I decided to choose between the 1) Dell U2711 & the 2) NEC PA241W based on performance / quality and / or the one that gives me less headache to install, initiate & operate etc. Knowing that they both are good I read again and more reviews and user’s reviews (these are always contradictory), but no comparison! The main points seem to be: size, 90o pivot , price (with the stand its about the same).
sRGB coverage: 1) 96% 2) 98%. Response time 1) 6ms 2) 8ms!  Warranty: 1) years+ 2) 4 years. These are just numbers, more important is the actual performance: pict quality, colors, uniformity, backlighting, dead pixels, etc – which one is better? Some complains about dead pixels on NEC (and about NEC’s customer support?)

3. Installation etc.: NEC doesn’t come with a cable, nor with the hardware calibration program (is it separate from the calibration program?); there were some difficulties in installation. I don’t know if it’s any different for the Dell (my computer is Dell)
I didn’t consider HP because of the “bone”, but I don’t think that they have a product to compete?

3. Coating: what you wrote makes sense. However, reflections might be controlled: angle, moving, shade…Whereas the Matte effect can’t. I heard from people the the heavy coating dulls the image: sharpness & color. It makes sense. It seems that light coating is a good compromise (I think Sumsung offers, but you don’t recommend them). Since both 1) & 2) have AG it’s a mute point (unfortunately, this has a meaningful negative effect on the daily work).

The best thing would have been to see and choose based on how the monitors look. But these guys do not sit in stores…

Thanks a million and have a great holiday!
(mine will be great if by then I at least decide if not order!)
Tuli

Tuli

PS

I just found a note RE Sumsung monitor: “The AG is not obtrusive on photos like every other non-glossy monitor.
Even with the QC problems, I couldn’t go back to something like a Dell with its aggresive AG coating!”

…………………………………………….

After the CNET Review on Dell U2711

Dell must update their old top-of-the-line UltraSharp models.
For example, this U2711 model has not been been updated for many years, and it has many shortcomings, like:
It comes with old and slow USB 2.0 ports instead of the newer and faster USB 3.0.
It runs very hot because it comes with old LCD instead of the newer and more efficient LED backlighting. You can turn off your heating system in the winter, and you will just have to suffer in the summer as this monitor emits a lot of hot air.
It has a very poor and cheap looking anti-glare coating. It irritates its buyers, and a monitor this expensive deserves a much better coating than Dell provides. Dell has priced this model very high, and the only way they sell them is to put these models on perpetual sales and offer coupons.
Very gimmicky and disappointing. Do not buy till Dell upgrades this monitor, and fixed all of the above bugs.

Posted by JohnUSA9 (10 comments ) June 26, 2012 2:22 PM (PDT)

Tuli

Hi Matthew,
I would greatly appreciate it if you help me PROMPTLY; I am lost!
I am so saturated and pressured that I can’t think anymore.
If I don’t get the computer, monitor, printer, software…right away it will be a big catastrophe

The best surface is between glossy and matte (dulls the picture). It’s an important working factor.
Which coating does the Dell have? How to find this info for different monitors?

I would like to get the Dell U2711; but unless you know of a specific stand appropriate for it then I am back to square one:
What can you tell me about the NEC multisync PA27 & PA24?
The 27 is expensive ($1045/1145?); is the 27″ much better the the PA24 in performance & features??

What about the Samsung S27A850DW? Is it a photo-editing monitor?

The dell U24 is much inferior to the Dell U2711 in which they fixed quite a few serious problems of the 24.

Or maybe I should go to the 23″ (strange size). They are considered “entry level” is there really a noticeable difference?
Could you list the ones that you mentioned in priority order?

Specs don’t state whether the monitor is std or extended gamut. It’s also hard to find the # of bits or color range.
Dell U27 claim 10 bits but only 1.07 billion colors, not 16.7???

How do I set the Operating system to switch between the extended and standard modes?
Which calibration system do you recommend, I’ll follow your advice.
I heard mention that hi end monitors come with a calibration system but I don’t see it in the specs?

I must move and I am sure that your recommendation will be better then me throwing a coin!

Thanks a million, I can’t thank you enough! You are a life-saver.
Tuli

Tuli

Hi Matthew SOS,
I was so happy to see your response after almost giving up. I was going over all the material together this evening so that everything is fresh and make a decision. I am under a lot of pressure: I was chosen for a very important solo show that can dramatically change my life and I don’t see how I can be ready, even on account of sleep. I liked you suggestion and decided to go with the Dell U2711 (HP, beside the fact that 30″ is too big & that I have a big bone with HP, CNET claim that it’s much inferior to cheaper monitors. So I dedicated the evening to read about the Dell to make sure and liked what I read (beside a negative user’s review). (8 bit should give 1.6 billion colors; they claim 10 bit but only 1.07?). Then I searched for a stand. I realize that this is a whole new research project. I must research, choose, purchase, install and use very, very expensive computer, monitor, professional printer, camera, lenses, software, install them all and be able to use like a year ago! The stands take a lot of space, the sturdy are very expensive, there are so many different ones, different design, shape, material, functioning…I am not able to research with one is the appropriate to support such a precious monitor and to function properly.

Please let me know if you know of any specific one. Otherwise, I am back to square one.

If I do not proceed promptly (it’s already very bad) it will be a catastrophe!

Thanks a lot,
Tuli

Tuli

Hi Matthew

HELP! Your article is very educational, however, the more I read the more confused I am. I urgently need a computer (delayed because of the monitor) and a monitor for professional photo processing (Light room, Photoshop) to print on Epson professional Stylus. I also need to produce online / web… images but can only have one system.

My photo genre are unusual reflections, surreal / “abstract” images; so I don’t know to what extent the “color accuracy” is important; but I also have conventional photos.

I am ready to go as high as $1,000 if it gives me a meaningful advantage. I prefer a 27” but consider a 24” if it gives much more. I considered Dell 27” but the 90o pivot is important for me. The Dell 24” is of lesser quality. I would like the NEC PA271W if it was in the price range, or can compromise on the NEC PA24. The Samsung S27A850DW looked good until I read that it is good for business applications and not photo editing; is it? I heard contradicting opinions whether one can use an Apple monitor on a PC, or that even if possible; it will loose quality (the cinema isn’t in your list?).

However, if going with 24”, you listed very good ones that are much cheaper then the NEC.

Thanks a million

Chip

Hello Matthew,

Thank you for the informative article. I noticed the only monitor with incomplete specs was the Apple Cinema Display. Since it’s been a few months now since you put this together, do you have additional specs for this and/or the newer 27″ Thunderbolt Display? I do post processing with Aperture and Nik Software, and print to a Canon Pixma Pro 9000 II. Right now I’m doing post on my 15″ MacBook Pro and want to step up a bit. Of course, going with the Apple 27″ is an option.

ipslover

Thank you for such an informative overview on IPS monitors. I am just wondering if you reviewed any of the lower cost monitors such as the LG that offer , IMHO, a pretty good panel at a much reduced price. I am not saying they would be as good as compared to a $3000 unit but are at least a huge improvement over just about any TN panel monitor. I found that the HP and Dell that I was looking into at a $600 range were afforable but just about impossible to find to look at without ordering on line . I was however able to find , instore, LG monitors ( which I believe have the same IPS panel that are in the Dell and HP) under $300. I know the more professional units have a sturdier build and extras such as usb connections and they swivel and rotate, but I think it is nice to at least have another innexpensive option that gets a user into the IPS world over the TN panels.

Phillip Lang

I recently purchased the new ASUS PA246Q 24″ IPS monitor. After i got it calibrlted using an Eye1 Display2 monitor calibrator it’s great. I love it!!!! It is priced under $500.00. It has a nice large screen and is easy to move for viewing. I purchased mine from newegg.com If you get on and need help calibrating it feel free to contact me. Phillip Lang Jr. North Woods Studio Bowler, WI nwstudio@frontiernet.net

Phillip Lang

Hi Matthew, I ordered the iOne Display 2 color calibrator today. this should help me get the monitor calibrated. I don’t remember if I mentioned that I spoke with one of the tech people from ASUS about calibrating the monitor. He said that in his 10 years of working at ASUS he had never heard of someone calibrating their monitor. I thought this to be rather odd. After I receive the iOne if I hae any questions at that time I will contact you. Maybe in the mean time you’ll have a chance to do some research on the monitor and it’s settings.

Thanks,
Phillip

Phillip Lang

Hi Matthew, The manual for the Spyder is dated 2001. I didn’t think it was that old! WOW how time flies.
Is there a way I can email you the pdf of the manual?

Phillip Lang

Phillip Lang

Hi Matt, The Spyder I have is an older one. On the box is says: CLV122 Spyder w/PhotoCal (CRT/LCD version. The software is version 2.7.7 This is one of the first spyders made. I hope this helps. I spoke with one of the tech people at DataColor who now sells the Spyder. He said that I should get a new Spyder because the older on can’t read the colors on the new LCD monitors. He said the Spyder3 Express would work for what I need.

Thanks fro yor help.
Phillip

Phillip Lang

Hi Matt, Did you receive my message about the new ASUS PA246Q monitor I just purchased?

Phillip

Phillip Lang Jr.

Hi Matthew, Earlier in the year I contacted you about getting a new monitor. I purchased the ASUS PA246Q.
It is an IPS 24 inch. Very Nice!. I need some help getting it calibrated. I have an older ColorVision Spider color calibrator. Software V 2.7.7. Here is the link for the specs on the monitor http://usa.asus.com/Display/LCD_Monitors/PA246Q/#download

Here is the link for the manual http://support.asus.com/Download.aspx?SLanguage=en&m=PA246Q&p=13&s=28

I mostly do photographs of people: High School Seniors, Families, Weddings, Undergrads, etc.
I am convussed on what Mode to use: Standard, sRGB, Adobe RGB, Scenery, Thearter or User.
Depending on the mode selected, your functions as far as setting Brightness, Contrast, Saturation, Hue, Color Temperature, Gama and RGB are limited.
I need to know which mode to use with the spider calibrator. When using the Spider do I select that the monitor has RGB settings, temp is 6500K or no settings?

If possible I would like to give you a call to go through this step by step.

Thanks,
Phillip Lang Jr. North Woods Studio Bowler, WI nwstudio@frontiernet.net

Alfred Lopez

Matt,

Are the LCDs on the MacBook Pros the same type as the Cinema Display? I calibrate my screen often and the caliration method allow me to use color spaces beyond AdobeRGB. I think I still need to get something like a ColorMunki or something especially if I intend to start printing. Then again, I need to get a good printer like the Canon 9000 series or the Epson 4900.

Alfred

Karen C

Great article, Matthew! I checked the cheaper option you recommend (the ViewSonic VP2365WB) on Amazon. Currently selling for $289. Says it has a USB connection from PC to the monitor, so hopefully I can save up and use this for my Dell laptop. Thanks for the tip in my other thread!

Walter Lau

There is an option to output video from your USB. Purchase what is called a USB video adapter and it outputs VGA or DVI. This is the one I have:

http://www.visiontek.com/products/pc-components/accessories/laptop-usb-video-adapter.html

I works great if you have up your signal from VGA to DVI or if you want a dual monitor setup but only have a single output (eg laptop).

Phillip Lang

Have you heard of the ASUS PA246Q? If is an IPS monitor and looks very impressive.

Phillip Lang

After you have researched this, please let me know what you think. Thanks Phillip

Phillip Lang

Hi Matthew, Well I am still struggling with the monitor issue. I thought I set on getting the Dell U2410 but the more I thought about the revision numbers and the color shifting I’ve read about the more at ease I felt. I guess I’m back to starting over. I have looked at the HP LP2475W and the ZR24W. I guess out of these two which you recommend? I wish there was a place where you could go and look at them!

Phillip Lang

I called Dell and asked the about the revision: A03 & A04. They said that they are only showing A02. I’m also seeing on the internet A05. This is getting more confussing! Now what do I do?

Phillip Lang

I have been doing some more research on the Dell U2410 and have found that some of the sellers are showing different revisions, A03 & A04. Do you know what the difference is?

Phillip Lang

What are you using to find the deals on the monitors?

Phillip Lang

It looks like I’ll be getting the Dell 24″ Thanks for all your help. Phillip

Phillip Lang

I found a Dell U2410 for $470.00 new. So between the Dell and the HP you told be about, which one would you recommend?

Phillip Lang

Photographs are all brought into Photoshop taken under the sRGB color space. Everything I do is in sRGB. You said that then I may not need a monitor with the extended gamut. Any suggestions? I still want a monitor with the IPS.

Phillip Lang

The computer that this monitor will be connected to is my studio computer for photo editing and desk top publishing. I do not go on the internet with it. I have another computer for that. With that in mind what color gamut would I set on the monitor. My color profile is set to sRGB in Photoshop. Wouldn’t I have the same set on the monitor.

Phillip Lang

Hve you heard of DoubleSight monitors? They have a 27″ (ds-277w)
Another photographer told me that I should get an LED not LCD type monitor.
I see that all the high end IPS monitors are LCD. I confussed again.
What is the difference?

Phillip Lang

I am still looking at differnet monitor types to make my decission from on which one to purchase. Have you heard of Hazro, they are out of the UK and suppose to have a couple of new monitors out that are IPS and very reasonable.

Phillip Lang

I am looking at getting a new monitor. I am interested in either the NEC PA271W-BK or the Dell U2711 both are 27″ monitors, which one would you recommend or is there a different 27″ monitor that you would recomend?
Thank you,
Phillip

Phillip Lang

I guess because of the price factor I am now looking at a 24″ monitor. I al still looking at a Dell, the U2410. You mention in your article about the 2410 having some color managment issues with operating systems earlier that Windows 7. I am running XP professional and using a Spider color calibrator to calibrate my monitor. WIll this work or not. In your earlier reply you mention that Dell is coming out with the U2411. Is this to take care of the color issues with the 2410?

Todd

It seems in your article you left out a very impotent point of, should I get a standard gamut or wide gamut. The article sort of gives the idea that more is always better, that wide gamut is better then standard.
After spending a week trying to decide if wanted a standard or wide gamut, I have learned that this is very important in making a decision on a monitor.
The answer seems to be that if you print your own photos at home, or do color critical work, then you might want a wide gamut. If you post all your photos online, and print them online, then a standard gamut might cause you less trouble, and be more of a advantage.
I ended up going with the HP ZR24w instead of the HP LP2475w because of this. The price difference between these two is only $80, and I almost went with the LP2475 before I learned that I really needed a standard gamut

Robert Hogan

You let Samsung out “for a reason.” What is that?

Lynelle

I was wondering what Samsung monitors you had problems with and what kind of problems. I have the Samsung SyncMaster 245T. I bought it I think 3 years ago, because it was suggested as a good color editing monitor for photos then. It was $600. I have been frustrated at how the photos posted on my blog don’t match my original photos. I think it has to do with the part where you said that my monitor has an extremely wide gamut, so it just shows the colors off, because they seem to be fine on other computers or devices.

I am not sure how I can get it to display a lower gamut???

I have cailbrated it with a spyder3 and it’s color cailbration seems to match that of adobe RGB, so it it covers more than sRGB and I am guessing that is why it’s off?

Should I keep my monitor or trade it in for a different one to get more accurate results when I view it? Or just change how it displays things?

John

This article is a little disappointing as you have not addressed critically important points such as internal LUTs. and you’ve overlooked themost important line of monitors other than EIZO, NEC Spectraview, which are routinely recommended as the best choice after EIZO. They are a better choice, more often recommended by top industry experts, than any of the other models you discuss here, including Apple and LaCie.